Table of Contents
How to Login to a Cisco Modem
Having to operate modern technology could be tricky at times. Though modern technology is invented to make life easier, the whole process of actually getting the hang of utilizing these gadgets could be a bit confusing. Modems and routers are no different; you have them delivered in your home, but after that, the rest is up to you.
Fortunately for you, however, I’m more than willing to guide you about the Cisco Modem Login technicalities that you are most likely having problems with. After this guide, you’ll be sure to log in to admin panels or change your WIFI passwords with ease.
Cisco Modem Login Instructions
Logging into your Cisco Modem could be done in three simple steps.
#1: Connect to your internet network. Check if you’ve already connected your modem to the internet. If you already have, then you’re free to proceed to the next step.
#2: Continue to the router’s IP address. Open your browser (can be Chrome, Safari, or any type of browser you have with you) then enter the default IP address of the modem.
#3: Enter your login information. Your login information would be your username and password. Enter the current login information that you have with you. After you’ve finished this step, you can rest assured that you’ve completed the Cisco Modem Login steps.
Cisco Modem Login IP
For a bit of information, IP stands for “Internet Protocol.” An IP address is the number assigned to a network and is the one receiving and sending data once connected to a network. When it comes to modems and home routers, its IP address will always start with the numbers 192.168.
With the Cisco Modem, its default IP address could be either 192.168.1.1 or 192.168.0.1 since it is a modem. These IP addresses are provided to log in to the router’s admin panel. Once you type in this IP address on the address bar, you’d be redirected to a site that will ask for your login credentials.
Cisco Modem Username and Passwords
Default Cisco Modem Login Username and Password
Modems and routers have default usernames and passwords installed. These default login credentials are the ones being used when your modem is brand new or has been reset.
The Cisco Modem Login system is no exception – most Cisco Modems have “cisco”, “admin,” or “cusadmin” as its default username. The password is referred to as the serial number and is placed at the sticker of your modem. If you’re having trouble identifying it, the password is usually composed of 9 numbers and starts with 2xxxxxxxx.
Changing Cisco Modem Login Password
Changing usernames and passwords of your modem is necessary, especially when you have unwanted people connected to your network. Having your username and password changed could even help make your WIFI more secure.
The steps for changing the username and password for other modems – such as the Sagemcom Router Login – may vary, however. It goes the same for Cisco Modems 3825 and 3848V. Regardless, these steps are easy to comprehend and follow.
Changing Cisco Modem 3825 Login Credentials
- Go to the router’s IP address, which can be either 192.168.1.1 or 192.168.0.1.
- Enter your login details. For this, you would have to use your recent username and password. If your router is new or has been recently reset, use your default login credentials.
- Look for the “Setup” tab at the top of the page. Click this tab.
- After being redirected to this tab, click on the “Quick Setup” option.
- Fill up your desired new password in the Pre-Shared Key area.
- Save the changes you’ve made by clicking on the “Save Settings” option.
Changing Cisco Modem 3848V Login Credentials
- First, visit the IP address of the Cisco Modem. You are free to use either 192.168.1.1 or 192.168.0.1 to be redirected to the router’s admin panel.
- Fill up your login details. Make sure to use your recent username and password, or if not, you could input your default login information.
- On the top of the page, you could spot a tab that reads “Wireless.” Click this tab.
- Go to the Wireless Security tab.
- You can type your new password in the Pre-Shared Key area below the 2.4GHz Wireless Security and 5GHz Wireless Security fields.
- Make sure to save your changes by clicking on “Save Settings.”
Manually Configuring Your Cisco Modem for Internet Access
Before proceeding to configure your Cisco Modem, make sure that you are connected to a stable internet. Working with a slow network delay your process and stress you out. Contact your internet service provider if you have any concerns with your network.
Setting up Your Cisco Modem
#1: Equip yourself with a computer, laptop, or even a mobile device that could launch a browser. Open any browser you have with you, may it be Chrome, Safari, or anything else.
#2: Type in http://www.routerlogin.net.
#3: Enter your modem’s default username and password. Most usernames and passwords are “admin” and “password”, respectively. It could be found on your modem as well; check your device or the manuals that come with it.
#4: Click on “ADVANCED” before proceeding to the “Setup” tab. After this, select the “Internet.”
#5: Enter an account name or a hostname in the “Account Name (If Required)” section if your network provider necessitates it.
#6: Type in a domain name in the “Domain Name (If Required)” section if your network provider necessitates it. The default information and settings could work with the other fields of the page, but you are still free to change these.
#7: Choose an IP address radio button.
- Consult your internet service provider (ISP). Your ISP assigns IP addresses through the use of Dynamic Host Configuration Protocol or DHCP.
- Input the IP address and the IP subnet mask (this subnet mask is used to split the IP address into two separate parts) before entering the gateway IP address.
#8: Choose a Domain Name Server (DNS) Address radio button.
- Consult your internet service provider (ISP). Your ISP assigns IP addresses through the use of Dynamic Host Configuration Protocol or DHCP.
- Know if your ISP requires particular servers. If yes, choose this option. Input the IP address of your internet service provider’s DNS server and also input a secondary server address if there is one.
#9: Don’t forget to click on “Apply” to save your changes.
Resetting Your Cisco Modem
Resetting your Cisco Modem would also restore your login password back into default. Your WIFI channel and network username will also be modified by doing this. It may sound a bit complicated, but it could actually be done in a few simple steps.
- Search for the pin-hole reset button, which is usually placed at the back of your modem.
- With using a pin or a paperclip, push and hold this reset button for approximately 15 seconds.
- Once the lights on your modem start flashing, it’s indicating that you have successfully reset your Cisco modem.
About Cisco Modem
It has been founded in 1984 and has been providing services to countless homes since its first product in 1986. Since then, it has also continuously helped families and industries have access to a greater and faster internet for their personal and business needs. Up to this date, Cisco has never stopped producing and selling high-quality equipment, including its modems.
FAQs
What are the lights on my modem?
- The lights on your modem could indicate the status of your internet connection: if it is slow, fast, or maybe unavailable.
What’s the difference between a modem and a router?
- Your modem, just like the Cisco modem, would be the one connecting your home’s network to the wider internet. With the use of your router, you could have your gadgets – wired or not – connected to this wider internet.
Conclusion
Overall, the Cisco Modem is a reliable modem. Guaranteeing you fast internet access, you could scroll through social media, stream countless series and movies and even manage your business from home with ease. Not to mention, the Cisco Modem Login system is also easy to manage.