Are you looking for a precise Hitron Router Login guide? Then you come to the right place. Hitron Technologies has some of the best and reliable cable modems available. Some customers settle on cable or fiber internet connection rather than DSL as it is consistent. If you have just obtained your modem from the internet service provider, follow this guide in installing and logging in to make changes to your settings.
Table of Contents
How to Log In Into Hitron Router
After getting your Hitron Router, make sure it includes accessories like the box itself, A/C power cord, coaxial cable, and Ethernet cable.
Hitron Router Installation
- Get the whole thing you want to set up your router. After finding a perfect area for installation, follow the guides below in installing the hardware.
- Connect the cable into the coaxial port located at the back of your router. Put the other end of the cable to the wall outlet.
- Insert the A\C cable into your router. Connect the plug into an outlet.
- Pay attention to the light located at the front of the router. Make sure they blink the moment you turn it on. If it is, then go to the next step.
- Using your Ethernet cable, insert the router to your PC. Put one end to the Ethernet port located at the back of the router. Insert the other end to your PC or laptop Ethernet port.
Hitron Router Log In: How To Do It
After setting up the hardware, you are now able to log in to your router using this guide:
- On your PC, open the browser of your choice. In case you don’t have the internet, make sure to check the connections on your router.
- Key in the default IP address of your router in the browser and then press Enter. In this case, your default IP address is 192.168.0.1. To know the default IP address for your specific router, see the sticker located at the router’s side or back. You will see information such as default IP address SSID network name and password as well as default admin login credentials.
- Once the login page appears, type in the default password and username and then press OK.
- For many Hitron router, the default username is Admin or cusadmin, which the default password is “password.” You are able to find admin login credentials by checking the sticker on the side portion of the router.
- Now, you are logged into your Hitron router.
Hitron Default Username & Password
# | Username | Password |
1 | cusadmin | password |
2 | admin | admin |
3 | cusadmin | Printed on Router Label |
Guide on Resetting Hitron Router
If you cannot access your router, the best thing to do is to reset or reboot it. It all depends on the problem you are facing; a reset might address your issue. In case it doesn’t work out, then a factory reset will bring back the router to its default settings.
Hitron Router Rebooting Guide
A reset or reboot is an easy solution for a non-complex problem with the router. If you’re having an issue in logging in, or the router runs slowly, it sometimes needs rebooting. In this case, you need to follow the guides below:
- Look for the power button and switch it off. In case the router does not have a button, disconnect the router from the wall outlet.
- Wait for five to 10 seconds.
- Turn on the router. Plug the router or press the power key.
- Please wait until it boots up prior to trying to log in or before you use the internet.
Hitron Router Rebooting from Admin Menu
If you’re already accessed your router, reboot it in from the menu. Here is the step to reboot your router from the menu.
- Press Admin menu
- Choose Device Reset
- Press Reboot
- Your router will switch off itself and back on over again.
Hitron Router Resetting Guide
If you cannot log into the router after rebooting, then resetting is the best thing to do. This erases all of the settings, meaning it will go back to its factory default setting. Then, you can utilize the credentials posted on the side of the router to log in.
There are ways of resetting the router, such as:
Resetting a Hitron Router from the Menu
It is easy to reset a router from the menu; all you have to do is to follow this guide.
- On the home page, press Admin. Usually, this menu can be found at the top of the screen, but sometimes it can be found on the left portion of the screen.
- Then, choose Device Reset. Follow the necessary prompts to start resetting the router. It will switch off and will reboot automatically. Once it turns on, the factory setting will be restored.
Resetting Your Router With the Use of Reset Button
If you find it hard to log into the router, you are able to reset it manually. You can do this by following this step:
- Look for the reset key on the router. Normally, it is located at the back of the router near Ethernet ports. When resetting the button, connect a small item inside of it in order to reset the button. You can use a SIM card, paperclip, or a ballpoint pen to press the key.
- Press and hold it down for a few seconds
- Then it will start the resetting process. The lights will blink, and it will automatically reset. It will switch off and switch on. Make sure to avoid touching the router during the resetting process.
- The router will go back to its default setting once it turns back on.
Conclusion
Using this Hitron router login guide will help you access your router easily. This will help you experience faster speeds as well as faster uploads. This is valuable once you operate a home business. It is also beneficial if your loved ones make use of many devices like mobile phones or PCs. So, make sure to keep these tips in mind.